About this Dataset

Wind Turbine Sound Setbacks And Supply Curves: Ordinances And Extrapolated Trends, 110 Hub Height, 130 Rotor Diameter

This dataset provides a comprehensive set of wind turbine sound setbacks from every residential structure in the contiguous United States (CONUS). A sound setback is defined as the minimum required distance between a residential structure and a hypothetical turbine installation site to ensure that modeled sound levels received at the residence do not exceed local sound ordinances, which are commonly expressed in A-weighted decibels (dBA). Therefore, sound setbacks are a local spatial assessment combining multiple factors, including the sound pressure curve as a function of the observer location (distance and direction) relative to the turbine, local sound regulations, and the geographical distribution of residential structures. The dataset is organized into multiple scenario-based products, detailed as follows:

Existing and extrapolated sound setbacks. An existing scenario characterizes sound setbacks only in states or counties that have implemented sound regulations as of 2022. The extrapolated scenarios extend a constant sound threshold to counties that lack explicit sound regulations, with thresholds ranging from 35 to 60 dBA, in 5-dBA increments reflecting the variation observed in current sound ordinances.
Sound setbacks in directional and worst scenarios. The directional scenario accounts for the distance and orientation of residential structures relative to a hypothetical turbine location, utilizing the turbine's sound emissions in that specific direction. In contrast, the worst scenario takes loudest sound level at each distance step from the turbine, irrespective of directional considerations, which aligns with current industry practice.
Supply curves for Open and Reference Access scenarios. This dataset includes supply curves generated by the reV model, which integrates each of the above sound setbacks into both Open and Reference siting scenarios. In addition, two Open and Reference baselines scenarios were included which do not consider sound setbacks for comparative analysis.

All sound setback data are stored in TIF files, with partial maps of the data provided in PNG format. The values in the sound setback raster range from 0 to 1, representing the fraction of developable land within a 90 meter by 90 meter pixel due to sound ordinances. A value of 0 indicates areas where wind energy development is prohibited, while a value of 1 signifies areas fully permissible. The wind turbine parameters used in the sound modeling are based on the land-based turbine from International Energy Agency (IEA), featuring a rated electrical power of 3.4 MW, a rotor diameter of 130 meters, and a hub height of 110 meters. The atmospheric conditions, including wind speed/direction, turbulence, air temperature, relative humidity, and air pressure, that drive the sound generation are obtained from the WIND Toolkit dataset.
Organization: Department of Energy
Last updated: 2025-01-15T19:50:04.508143
Tags: county-ordinance, data, land-based-wind, png, regulation, regulatory, regulatory-constraints, setback, setbacks, siting-lab, sitinglab, sound, sound-ordinances, sound-regulations, sound-setbacks, surrogate-modeling, tif, turbine, wind-energy, wind-power

Tables

Baseline - Open Access 110hh 130rd Supply Curve

@usgov.doe_gov_wind_turbine_sound_setbacks_and_supply_curves__6127fb73.baseline_open_access_110hh_130rd_supply_curve

3.09 MB
58372 rows
10 columns


CREATE TABLE baseline_open_access_110hh_130rd_supply_curve (
  "unnamed_0" BIGINT,
  "longitude" DOUBLE,
  "latitude" DOUBLE,
  "county" VARCHAR,
  "state" VARCHAR,
  "country" VARCHAR,
  "mean_cf" DOUBLE,
  "mean_lcoe" DOUBLE,
  "capacity" DOUBLE,
  "area_sq_km" DOUBLE
);

Baseline - Reference Access 110hh 130rd Supply Curve

@usgov.doe_gov_wind_turbine_sound_setbacks_and_supply_curves__6127fb73.baseline_reference_access_110hh_130rd_supply_curve

2.85 MB
53560 rows
10 columns


CREATE TABLE baseline_reference_access_110hh_130rd_supply_curve (
  "unnamed_0" BIGINT,
  "longitude" DOUBLE,
  "latitude" DOUBLE,
  "county" VARCHAR,
  "state" VARCHAR,
  "country" VARCHAR,
  "mean_cf" DOUBLE,
  "mean_lcoe" DOUBLE,
  "capacity" DOUBLE,
  "area_sq_km" DOUBLE
);

Directional Scenario - Open Access 110hh 130rd Existing Ordinances Supply Curve

@usgov.doe_gov_wind_turbine_sound_setbacks_and_supply_curves__6127fb73.directional_scenario_open_access_110hh_130rd_existing__6a18a8f6

3.06 MB
57477 rows
10 columns


CREATE TABLE directional_scenario_open_access_110hh_130rd_existing__6a18a8f6 (
  "unnamed_0" BIGINT,
  "longitude" DOUBLE,
  "latitude" DOUBLE,
  "county" VARCHAR,
  "state" VARCHAR,
  "country" VARCHAR,
  "mean_cf" DOUBLE,
  "mean_lcoe" DOUBLE,
  "capacity" DOUBLE,
  "area_sq_km" DOUBLE
);

Directional Scenario - Reference Access 110hh 130rd Existing Ordinances Supply Curve

@usgov.doe_gov_wind_turbine_sound_setbacks_and_supply_curves__6127fb73.directional_scenario_reference_access_110hh_130rd_exis_53adeba2

2.8 MB
52517 rows
10 columns


CREATE TABLE directional_scenario_reference_access_110hh_130rd_exis_53adeba2 (
  "unnamed_0" BIGINT,
  "longitude" DOUBLE,
  "latitude" DOUBLE,
  "county" VARCHAR,
  "state" VARCHAR,
  "country" VARCHAR,
  "mean_cf" DOUBLE,
  "mean_lcoe" DOUBLE,
  "capacity" DOUBLE,
  "area_sq_km" DOUBLE
);

Worst Scenario - Reference Access 110hh 130rd Existing Ordinances Supply Curve

@usgov.doe_gov_wind_turbine_sound_setbacks_and_supply_curves__6127fb73.worst_scenario_reference_access_110hh_130rd_existing_o_b1bc5436

2.79 MB
52296 rows
10 columns


CREATE TABLE worst_scenario_reference_access_110hh_130rd_existing_o_b1bc5436 (
  "unnamed_0" BIGINT,
  "longitude" DOUBLE,
  "latitude" DOUBLE,
  "county" VARCHAR,
  "state" VARCHAR,
  "country" VARCHAR,
  "mean_cf" DOUBLE,
  "mean_lcoe" DOUBLE,
  "capacity" DOUBLE,
  "area_sq_km" DOUBLE
);